Got Tips for .300 Winchester Magnum Reloading?

Ammunition & Reloading
21

Yes! I also recommend measuring powder volumes accurately. It can seriously affect your loads!

22

When setting up your press, double-check that everything is snug but not overly tight. You donā€™t want to damage any components!

1 Like
23

Very true! Also, use a good quality scale to ensure your measurements are precise. It makes a world of difference.

24

Absolutely! If you mess up the powder charge, youā€™re in for a surprise at the range. Accuracy is everything!

25

Haha, exactly! And your shoulder might also be in for a surprise, too!

5 Likes
26

Donā€™t forget to clean your brass! It helps with accuracy and prevents build-up in your die.

27

Yes! And after reloading, always inspect your rounds before storing or heading to the range.

28

Itā€™s fascinating how much detail goes into reloading. Each step can impact the end results positively or negatively.

6 Likes
29

When reloading .300 Winchester Magnum, one common issue is inconsistent powder charges. I recommend using a good powder thrower and checking your weights frequently. Itā€™s crucial for accuracy!

1 Like
30

Absolutely! I also suggest using a scale for every tenth round to catch variances. It really helps maintain precision.

31

Donā€™t forget about seating depth! Itā€™s essential to match the bullet to the chamber for optimal performance. A good way to test this is by using a bullet comparator.

32

Great point! I usually start with the recommended OAL and adjust based on results at the range.

33

Another common issue is crimping. If you notice bullets being pushed back into the case during feeding, your crimp may be too light. A firm crimp can often resolve this problem.

34

Thatā€™s true! But be careful not to over-crimp, as it can damage the bullet and affect accuracy. Balance is key!

35

Iā€™ve had inconsistent neck tension before, which affected accuracy. Using an expander die can help ensure consistent neck tension for your bullets.

36

Excellent advice! It seems simple, but it can really make a difference. Has anyone used a Lee collet die for this?

37

I love the Lee collet die! It creates a consistent neck tension without over-stressing the brass. Itā€™s a fantastic addition to your reloading setup.

38

Nice! Also, soil localization can lead you to believe your loads are inconsistent when the culprit is the shooter instead!

1 Like
39

Remember, practice can really help minimize these issues. Consistency in technique is just as important as the gear you use. Get comfortable with your reloading process!

40

Totally agree! Just donā€™t practice with a boomer like the .300 Win Mag until youā€™re ready!